There was an error in this gadget

Friday, April 27, 2012

Movie Poster Analysis

Colours
The colours are dull shades of yellow and brown. I believe that these colours have as they are the sort of colour that you expect to see for an infection as they look dirty and possibly mouldy. Also they are very natural colours and a lot of the time they are in a desert

Text
There is some writing in the background of the image that looks like it has been scratched into the wall and it is a warning to anyone who sees it to be careful when they encounter people they do not know. If you were to see this from far away you would naturally be curios to read it and find out what it says. Then when you have read it you might want to see the film as anyone who sees that can tell that the film is about an infection as it hints it is on the poster. The writing dose look rushed and unclear like someone has gone into a room and scratched it with something then left. The title is white so that it stands out against all the other colours and it looks a little faded and there is little bits of brown on the text making it seem dirty.

Positioning
They use a very simple poster as they have a woman who looks ill and in pain covering at least half of the poster and just above her is the warning message. It is very simple and from far away you can still see the woman and the colours make it obvious that it is the thriller genre. For anyone passing it they might stop to look at it as it dose stand out.





Colours
Trpical colors blacks and greys. They have Liam Neeson behind the text and you can see a small amount of detail on him. They have The title in orange so that it stand out against the other colours in the poster.

Text
They have a lot of text on the screen. The main characters name, the title and one of the lines from the film. I think that the quote is made a little duller in colour so that you see the title first then you would look at what the quote says. The title is bold so that it is eye catching and it is just plain orange. Im not sure why the colour is orange as red would be a little more fitting for the film as the man is out for revenge.

Positioning
Im not sure is this poster works as well as the other as there is to much going on in it. I like that you can see the gun over the tittle, but not to much so you cant read it. I also think that there is to much text on the poster and someone that passes it might not want to look at it because of that.


Colour
There are very dull and cold colours on this poster giving you a slight idea that this is a thriller. It also makes you think about what it is about as the poster dosnt tell you a lot.

Text
The text looks a little fancy witch works as in the film this man is very rich. Also were it positioned works well as it stands out against the black of the clothes. Just below the tittle you see the date when the film is out in cinimas and you might be curiouse to see what the film is.

Positioning
I think that the possitioning of everything in this poster works reall well. It stands out and i do belive that this poster works to get people to look at is as befor i saw the film i saw the poster and it made me want to see the film. You also see that half of his face is like an old painting and if you have seen the film then you would understand what it is all about.

Friday, April 20, 2012

Print...

Equipment:

-Apron
Keeps clothers protected
-Screan and bored












For your image to be on. Then you can print onto materials.
-Squeegee












You use to push the paint throught the mesh of the screen.













You use this to put paint onto the screen and to mix colours.














-Paint
This is for printing













-Light box
This is what you use to expose the screen with the photo sensitive emulsion


-Assotate
This is what your image goes on. Then you put it onto the lightbox and it makes sure that part of the screen has your image


-Printing materials (shirt/paper)
Paper or a shirt to print your image onto.












-Jet wash
This is to wash your screen. Almost all of the photo sensitive emulsion will stay on the scr5een apart from what wasnt exposed.








 -News paper
To try and keep the table clean.










-Scooper
Or trouh is used to put the photo sensitive emulsion onto the screen

-Photo sensitive emulsion
This is placed onto the screen and when its dry it is put onto the lightbox to be exposed and if there is anything that is blocking the light then it will not harden in that area. this is how you create your image on the screen.


How to apply the Photo sensitive emulsion.
  1. Chose the screen that you want to use
  2. Find the Photo sensitive emulsion
  3. Find a scooper
  4. Find something to lean your screen against.
  5. Put enough Photo sensitive emulsion in the scooper to fill up the dip in it.
  6. Press the scooper against the screen until all the Photo sensitive emulsion is against it
  7. Slowly pull the scooper up, applying the Photo sensitive emulsion onto the screen.
  8. Leave it dry for a couple of hours in a dark area, so that the screen is not exposed to any light.

How to use a light box

  1. Make sure that you picture on the assotate is as dark as it can be, so that no light passes through it.
  2. Place the assotate onto the glass.
  3. Place the screen on top of the assotate in the are that you want it.
  4. Close the lid to the light box
  5. Lock it
  6. Then press the Vacuum button and waite for it to be done.
  7. Make sure it is on 120 units
  8. Press the green start button
  9. Then hold down the starter button for 5 seconds.
  10. Waite for it to be done then click off the vacuum button
  11. Waite for it to return to its normal shape
  12. Then you can open the lid and take your screen and assotate
  13. Then affer a little while you can wash of the are where your assotate was to show your image.

How to put photo sensitive emulsion onto the screen

  1. First you get the screen you want.
  2. Then get the photo sensitive emulsion and scooper.
  3. You then find someone who will hold your screen for you.
  4. Place the photo sensitive emulsion onto the scooper and try and spred it evenly.
  5. Make sure the screen is at a slight angle.
  6. The place the edge of the scooper against the bottem of the screen.
  7. Wate for the photo sensitive emulsion to be pressing against the screen.
  8. The pull the scooper up. Not to fast but trying not to be very slow.
  9. When you get to the other end of the screen tip the scooper towards you.
  10. Wait for the photo sensitive emulsion to move back. Then you can take away the scooper.
  11. Afterwards make sure you see were the photo sensitive emulsion might drip.
  12. Then put it somwere that it wont be exposed to any light.
  13. And make sure that you leave it so it wont drip onto itself.

CMYK
http://www.webopedia.com/TERM/C/CMYK.html
Short for Cyan-Magenta-Yellow-Black, and pronounced as separate letters. CMYK is a color model in which all colors are described as a mixture of these four process colors. CMYK is the standard color model used in offset printing for full-color documents. Because such printing uses inks of these four basic colors, it is often called four-color printing.
In contrast, display devices generally use a different color model called RGB, which stands for Red-Green-Blue. One of the most difficult aspects of desktop publishing in color is color matching -- properly converting the RGB colors into CMYK colors so that what gets printed looks the same as what appears on the monitor.





-Spatula

Wednesday, April 18, 2012

Photoshop - edditing for asotate

Step 1: Get a picture that you want to use and put it onto photoshop.

Step 2: Go to Image-Ajustment-Desaturate. This gets rid of all colour from the picture.

Step 3: Then go back to Image-Ajustment then click on Levels.


Step 4: Change the levels so that there is only black and wight in the image.



This is one method.